DIY TUTORIAL: WOODEN TABLE NOTES
MaterialsBest Creation Heat Transfer Vinyl Iron-on HTV01 and HTV16
Metallic Best Creation Heat Transfer Vinyl MIO04
Wooden Table Notes
ToolsCutting Machine or dies
You can buy a Wooden table notes of any color or you can paint it with acrylic and let it dry.
Cut a design on the Heat Transfer Vinyl Iron-on HTV01 and HTV16, and the Metallic Heat transfer Vinyl MIO04.All products are from Best Creation Inc. Using your cutting machine or dies. Remember to use the mirror function in the design program, and cut the vinyl with the opaque side up. For designs with different layers, you must cut with intersection vinyls to try as much as possible not to overlap and make your design features more precise. Remove (weed) the extra glitter iron on, leaving only your desired image.
(Refer to the photo) Place your image on the material with plastic facing up (Refer to the photo). Make sure you place a separate piece of thin material on top before applying heat and set your iron on medium high, no steam.
Apply firm pressure with iron for 30 seconds. You need to begin with the back layer. Remove the plastic. Peel while cold. If you want, place the separate material or protective cover over image and iron on for an additional 5 seconds. And finish with the last level.
You can decorate this project for a school. It can be used for parties, games, gifts, and much more. It is important to use the Best Creation Glitter Iron because they are high quality vinyl.
We invite you to comment on what kind of designs (with instructions) you would like to see!
Use the store locator to find the closets retail store near you!!These are some ideas for your design!