DIY Kid's Mermaid T-Shirt
Remember our DIY Tutorial for the Under the Sea Invites? Well, here is a DIY for a matching T-shirt for the occasion! Using our glitter iron-on vinyl, you can customize any applicable surface for personalized gifts. You can purchase the vinyl from our Etsy store, link below:
Best Creation Glitter Iron-on GIO003
Best Creation Glitter Iron-on GIO021
Best Creation Pink Heat Transfer Vinyl
Cutting Machine or dies
You can buy a tee shirt of any color, and cut a design on the Glitter Iron-on GIO003 (Sand), Glitter Iron-on GIO021 (Bright Purple), and Pink Heat Transfer Vinyl using your cutting machine. Remember to use the mirror function in the design program, and cut the vinyl with the opaque side up. For designs with different layers, you must cut with intersection vinyls to try as much as possible not to overlap and make your design features more precise.
Remove (weed) the extra glitter iron on, leaving only your desired image.
(Refer to the photo) Place your image on the material with plastic facing up (Refer to the photo). Make sure you place a separate piece of thin material on top before applying heat and set your iron on medium high, no steam. Apply firm pressure with iron for 30 seconds. You need to begin with the back layer. Remove the plastic. Peel while hot. If you want, place the separate material or protective cover over image and iron on for an additional 5 seconds. And finish with the last level.
Your t-shirt is now ready!