Tote Boat Party DIY
Best Creation Glitter Iron-on GIO014
Best Creation White Heat Transfer Vinyl
Cutting Machine or dies
You can buy a tote of any color, and cut a design on the Glitter Iron-on GIO002 (Gold) and White Heat Transfer Vinyl using your cutting machine. Remember to use the mirror function in the design program, and cut the vinyl with the opaque side up. For designs with different layers, you must cut with intersection vinyls to try as much as possible not to overlap and make your design features more precise.
Remove (weed) the extra glitter iron on, leaving only your desired image.
(Refer to the photo) Place your image on the material with plastic facing up (Refer to the photo). Make sure you place a separate piece of thin material on top before applying heat and set your iron on medium high, no steam. Apply firm pressure with iron for 30 seconds. You need to begin with the back layer. Remove the plastic. Peel while hot. If you want, place the separate material or protective cover over image and iron on for an additional 5 seconds. And finish with the last level.