Independence Day Onesie
This easy DIY patriotic onesie doesn't have to be just worn on the 4th of July, it is truly wearable year-round! Be sure to check out our website here to get your glitter iron on vinyl for this project.
Best Creation Glitter Iron-on GIO004
Best Creation Glitter Iron-on GIO012
Cutting Machine or dies
You can buy a body suit of any color, and cut a design on the Glitter Iron-on GIO012 (Ocean Blue) and Glitter Iron-on GIO 004(Red) using your cutting machine. Remember to use the mirror function in the design program, and cut the vinyl with the opaque side up. For designs with different layers, you must cut with intersection vinyls to try as much as possible not to overlap and make your design features more precise. Remove (weed) the extra glitter iron on, leaving only your desired image.
(Refer to the photo) Place your image on the material with plastic facing up (Refer to the photo). Make sure you place a separate piece of thin material on top before applying heat and set your iron on medium high, no steam. Apply firm pressure with iron for 30 seconds. You need to begin with the back layer
Set your iron on medium high, no steam. Apply firm pressure with iron for 30 seconds, with the subsequent layers.
Remove the plastic. Peel while hot. If you want, place the separate material or protective cover over image and iron on for an additional 5 seconds. And finish with the last level.